The ATE MK70 (Continental/ Teves) is similar to the MK60 but is more evolved. It is usually found in makes such as Ford, Mazda, Renault, Suzuki as well as others. Most of the time, it will be the wheel sensors that are at fault. Communications with the ABS’ ECU will often be impossible.
Possible Problems
- Diagnostic communications with ABS isn’t possible
- CAN-Bus system failures
- Pump malfunction
- Wheel sensor problems
Error Code Examples (Other makes also possible)
CITROËN / PEUGEOT
- C1350 – Valve Relay / Solenoid Valve Internal Fault
MINI
- 5DF5 – ABS Control Unit Internal Fault
RENAULT
- C10C3 – ECU Control Unit Defective
- DF017 – Computer Supply
SUZUKU
- C1051 – Right Rear Inlet Solenoid Circuit Failure
- C1057 – Control Module Power Supply Circuit Failure
- C1063 – Solenoid Valve Power Supply Driver Circuit Failure
- C1071 – Control Module Internal Defect
Can be remanufactured
CITROËN / PEUGEOT
Error code | Description | |
D000 | No communication CAN | |
C1350 | Valve relay fault |
FORD
Error code | Description | |
U3000 | Control unit failure |
MINI
Error code | Description | |
5DF5 | Internal fault |
RENAULT
Error code | Description | |
C10C3 / DF017 | Unit faulty / Voltage faulty |
SUZUKI
Error code | Description | |
C1051 | Right rear inlet solenoid circuit failure | |
C1057 | Control module power supply | |
C1063 | Solenoid valve power supply driver | |
C1071 | Control module internal defect |
Remanufacture may be possible
VOLKSWAGEN
Error code | Description | |
01130 | ABS signal implausible | |
01276 | Hydraulic ABS pump |
These error codes often indicate a defective bolt-down fuse on the battery. Check this fuse carefully first! If the fuse is still intact, please contact our Customer Service department.
Cannot be remanufactured
VAG (AUDI / SEAT / ŠKODA / VOLKSWAGEN)
Error code | Description | |
00003 | Control module adaptation | |
01130 | ABS operation: implausible signal |
Both error codes are relate to the coding of the ABS unit. In this case, perform the coding, preferably with Vagcom, and then go for a test drive. Both error codes will disappear and not come back.
If you are having issues with your ATE MK70 ABS unit, then we can help with a quick and cost-efficient repair. Just book online here, or give us a call on 0116 276 7054, email us at [email protected] or if you are local to us come into our shop in Leicester and talk to one of our experienced engineers.
David bourne (verified owner) –
Sent and pump in for repair to loss of abs system , power steering and engine management lights also on although after testing faults couldn’t be replicated but unit was rebuilt anyway and promptly returned after fitting and bleeding system all faults have now gone and car driving perfect