Ford Escape and Explorer B1342 – ABS Control Module Malfunction

When the ABS light is illuminated in Ford Explorer or Escape vehicles, it signals potential issues with the emergency braking system. This problem is often linked to ABS pump and module failures, manifesting in various ways such as internal defects triggering fault codes like B1342 (ABS control module malfunction) and C0020 (Motor fault). These issues may also lead to complications like the speedometer not working.

Internal failures can obstruct communication with the ABS system or prevent fluid from reaching specific calipers, resulting in braking imbalances and compromising emergency braking safety. Traditional solutions might involve costly complete replacements, accompanied by additional programming expenses.

However, we offer an alternative – a comprehensive test and rebuild service for Ford Escape and Explorer ABS modules. This process typically takes 2-3 working days and eliminates the need for additional programming, resolving ABS light illuminations.

BUY YOUR REPAIR

Affected Vehicles

• Ford Escape 2008-2016
• Ford Explorer 2006-2014

Common Symptoms

• No braking effort on one or more wheels
• Continuous ABS and ESP light illumination
• Inoperative speedometer
• Lack of communication with the ABS pump

Common Fault Codes

• B1342 – ABS control module malfunction (C1342)
• C0020 – Motor fault

Part Numbers

Ford Escape

• 00.0405-780C.4, 9L84-2C219-EA, 10.0961-0173.3, CV61-2C405-AH
• 10.0961-0195.3, CV61-2C405-AE
• 10.0961-0167.3, CV61-2C405-GA, 10.0961-0172.3. CV61-2C405-AF, 10.0961-0158.3

Ford Explorer

• 28.5264-8005.3, BB53-2C405-AF, 28.5264-8023.3, DB53-2C405-AD, 28.5264-8033.3
• EB53-2C405-AA, 28.5264-4100.3, AL24-2C405-AA, 28.5264-8004.3
• BB53-2C405-AE, 28.5264-8032.3

Test and Rebuild Process

• Every Ford Escape and Explorer ABS unit undergoes rigorous testing on advanced testing rigs, simulating real-world loads and driving conditions. Identified faulty units are then rebuilt with higher-rated components to ensure a lasting solution.

Programming

• Original programming information is retained during the rebuilding process, eliminating the need for reprogramming. Once received, the rebuilt unit is ready for a simple plug-and-play installation.

Quality

• Our work defect rate is less than 0.49%, and major dealerships trust us as their primary service provider for high-quality rebuilds, backed by our unlimited mile lifetime warranty.

Warranty

• Lifetime unlimited mileage warranty.

How to Get Your Unit Rebuilt?

1. Click the Buy Your Repair, select your part number, and proceed with the payment.
2. Print the payment/booking confirmation email.
3. Package the Ford Escape/Explorer ABS pump and module securely with the confirmation email.
4. Send the package via tracked courier (shipping instructions on the confirmation email).
5. Upon receipt, we’ll test, rebuild, and return your ABS unit with a lifetime warranty. If the unit isn’t faulty, we’ll refund your payment (minus a small testing fee and return shipping).

Option without Upfront Payment

1. Fill and submit the repair form.
2. Print the booking confirmation email.
3. Package the ABS pump and module securely with the confirmation email.
4. Send the package via tracked courier.
5. After testing, we’ll call you with the results. If the ABS unit is faulty and you opt for the rebuild, we’ll take payment over the phone.
6. We’ll then rebuild and return your ABS pump and module with an unlimited mileage warranty.

For further information, please contact us.

Contact AUTOTRONICS at 0116 276 7054 or email us at [email protected] for expert assistance. Our experienced engineers are here to solve all your queries and provide top-notch services.

BUY YOUR REPAIR

VIEW BY CATEGORY