ATE MK61 ABS EBCM Pump Module Fault Repair
Bosch, Siemens, Delphi, Magneti Marelli, Denso… whichever is the manufacturer of the ABS system of your vehicle, we can repair it.
The Antilock Brake System, ABS for short, is a vital part of nowadays road safety, helping you to brake and steer in dangerous situations and especially in adverse weather conditions like heavy rain or ice.
The ABS is basically formed of a pump with valves, some speed sensors and a control module. The speed sensors tell the system when a sudden deceleration is happening and it is then when the ABS ECU (the ABS ‘computer’) activates de ABS pump and valves, so that the tyres don’t slide or get locked.
But as every component on your vehicle, the ABS can also fail. If that is your case, don’t worry, we are here to help you!
- 5DF0 Hydraulic unit pump motor
- 5DF1 Hydraulic pump connector faulty
- ABS indicator stays on
- Brake indicator stays on
- No communication with diagnostic scanner
- Loss of power
- Intermittent performance
- No signal from wheel sensors
- Wheel speed sensor faulty codes
- ABS pump runs continuously
Should any of these signs appear on your vehicle, we recommend you to send your ABS module to repair as soon as possible, as it could drain your battery and eventually burn out the ABS pump.Once received, our highly-skilled engineers will repair the ABS for you, so that you can hit the road again safely.
In case you need any further advise about your ABS module or pump please don’t hesitate to contact us on†(0044) 0116 276 7054 or [email protected]. One of our engineers will be delighted to speak to you and solve all your doubts.
If you don’t see your car model listed don’t worry because we may still be able to assist you.