facebook

Toyota ecuToyota RAV4 ECU/PCM Fault – Harsh Shifting and Transmission Issues

Overview: The Toyota RAV4 ECU (Engine Control Unit)/PCM (Powertrain Control Module) is a common source of faults in vehicles produced between 2000 and 2006, leading to transmission problems. Drivers often experience harsh gear shifts, gears banging into place, and jerky gear selection, commonly referred to as the Toyota RAV4 Harsh Shifting Problem. This issue is particularly prevalent in the 2nd generation RAV4 (XA20).

This RAV4 ECU is a very common fault for vehicles built between 2000 and 2006 causing transmission problems, the common symptoms are described as feeling as though the gears are slipping and then banging/jerking into place – commonly known as the Toyota RAV4 Harsh Shifting Problem.

If you have been to your local Toyota mechanic, you may have been told that the following fault codes where stored within the transmission: P0755 – Shift Solenoid B Malfunction, P0758 – Shift Solenoid B Circuit Electrical or P0750 – Shift Solenoid A Malfunction. These fault codes may clear but always return, usually on ignition cycle.

The above faults are normally a clear indication that your ECU has failed and needs replacing, we are able to rebuild your own unit or supply a replacement unit

Buy Your Repair

View By Category 

Common Symptoms:

  • Harsh gear shift
  • Gears banging into place
  • Jerky gear selection
  • Engine management light on

Common Fault Codes:

  • P0755 – Shift Solenoid B Malfunction
  • P0758 – Shift Solenoid B Circuit Electrical
  • P0750 – Shift Solenoid A Malfunction
  • P0753 – Shift Solenoid A Circuit Electrical

Affected Vehicles:

  • Toyota RAV4 (2nd generation XA20) 2000 – 2005

Common Failing Part Numbers:

Test and Rebuild:

Our in-house Hardware In-the-Loop rigs and testing procedures thoroughly identify and repair defects in PCM/ECUs. Utilizing OEM or higher-rated components, we offer a full Lifetime Warranty, ensuring lasting reliability.

Programming:

With every RAV4 ECU repair or replacement unit, we update the software to the latest version. No additional programming is required – simple plug and play.

Quality Assurance:

Working closely with dealerships and specialists, our work defect rate is below 0.49% on all rebuilds. Our commitment to high standards is reflected in our rigorous quality control.

Warranty:

Lifetime unlimited mileage warranty.

Rebuilding Process:

  1. Pay for the Repair here.
  2. Print the payment/booking confirmation email.
  3. Package the Toyota RAV4 ECU/PCM securely with the confirmation email.
  4. Send the package via tracked courier (shipping instructions in the confirmation email).
  5. Upon receipt, we test, rebuild, and return your ECU/PCM with an unlimited mileage lifetime warranty. (Refund available if the unit is not faulty, minus a small testing fee and return shipping)

Alternative Payment Option:

  1. Fill and submit this Repair form.
  2. Print the booking confirmation email.
  3. Package the Toyota RAV4 ECU/PCM securely with the confirmation email.
  4. Send the package via tracked courier (shipping instructions in the confirmation email).
  5. After testing, we’ll call you with the results. If faulty and you choose to rebuild, payment is taken over the phone with a debit/credit card.
  6. We then rebuild and return the RAV4 ECU/PCM with an unlimited mileage warranty.

For further information, please
Contact AUTOTRONICS at 0116 276 7054 or email us at [email protected] for expert assistance. Our experienced engineers are here to solve all your queries and provide top-notch services.

Buy Your Repair

View By Category 

Transmission Control Unit

Leave a Reply

Your email address will not be published. Required fields are marked *

Need help?
Whatsapp
custom logoReviews
Reviews
4.9 Excellent