Suzuki Swift ABS Pump Fault – Causing ESP Light on

The ABS pump in Suzuki Swift vehicles is prone to common failures, resulting in the persistent illumination of the ESP light and the inability to fully engage the Anti-lock Braking System (ABS). A prevalent issue triggering the fault code “C1028 – Brake Pressure Sensor Circuit Defective” is internal component failure, rendering the ESP warning light continuously on. Notably, pressing the traction control (ESP) button does not resolve this issue.

Choosing a new ABS unit from the manufacturer might not be the most cost-effective solution, considering its high expense, short one-year warranty, and susceptibility to the same recurring problems. Our recommended alternative is a comprehensive rebuild of the original unit at a fraction of the cost. In contrast to the limited one-year warranty on new units, all our rebuilds come with an unlimited mile Lifetime Warranty*, providing both economic benefits and peace of mind.

BUY YOUR REPAIR

Affected Vehicles

• Suzuki Swift 2006-2011
• Suzuki Swift Sport 2006-2011

Common Failure Symptoms

• ESP/Traction Control warning lamp constantly illuminated
• C1028 – Brake Pressure Sensor Fault (Master Cylinder Pressure Sensor)
• Incomplete operation of the emergency braking system

Common Fault Codes

• C1028 – Brake Pressure Sensor Circuit Defective

Part Numbers

• 06.2109-0672.3, 06.2102-0487.4
• 06.2109-5200.3, 06.2102-0885.4
• 06.2109-5191.3, 06.2102-0982.4

Test and Rebuild

• Every ABS pump and module undergoes rigorous testing on our custom-built rigs before the rebuild process. Our Hardware In-the-Loop (HIL) rigs simulate real-world load and driving conditions. Faulty units are then stripped and rebuilt, with common failing components replaced with higher-rated versions. Post-rebuild, each unit is retested to ensure compliance with the original manufacturer’s specifications.

Programming

• Original programming is retained throughout the test and rebuild process, eliminating the need for additional programming or coding upon receiving the unit.

Quality

• Our stringent quality control measures cover testing, components, and workmanship, guaranteeing work of the highest standard. With a work defect rate lower than 0.49% on all rebuilds, we offer a superior alternative to replacement, collaborating closely with dealerships and specialists.

Warranty

• Lifetime unlimited mileage*

How to Get Your Unit Rebuilt?

1. Pay for the repair.
2. Print the payment/booking confirmation email.
3. Package the ABS pump and module securely, including the confirmation email in the box.
4. Send the package via tracked courier (shipping instructions in the confirmation email).
5. Upon receipt, we’ll test, rebuild, and return your ABS pump and module with an unlimited mileage lifetime warranty. If the unit is not faulty, we’ll refund your payment with a small testing fee and return shipping deducted.

Alternative Payment Option

1. Fill in and submit the repair form.
2. Print the booking confirmation email.
3. Package the ABS pump and module securely, including the confirmation email in the box.
4. Send the package via tracked courier (shipping instructions in the confirmation email).
5. After testing, we’ll contact you with the test results. If the unit is faulty and you opt for the rebuild, payment can be made over the phone using a debit/credit card. The rebuilt ABS unit will then be returned with an unlimited mileage warranty.

For further information on the Suzuki Swift ABS pump and module, please contact us.

Contact AUTOTRONICS at 0116 276 7054 or email us at [email protected] for expert assistance. Our experienced engineers are here to solve all your queries and provide top-notch services.

BUY YOUR REPAIR

VIEW BY CATEGORY